Adjustment of the switch of indication of position of the lever of the selector (A4AF3)
|
|
Move the selector lever to a position N.
Weaken a control lever lock-nut in a cable and lever junction.
|
|
Move a control lever to situation N.
|
Turn the case of the switch of indication of position of the lever of the selector on distance to 12 mm and combine the wide end of a control lever with a switch ledge.
Tighten bolts of fastening of the switch the moment of an inhaling of 10-12 N • m.
|
|
At turn of the case of the switch be careful not to damage a sealing ring. |
|
|
Check that the lever of the selector is in a position N.
|
Adjust the provision of a nut so that there was no sagging of a cable and the lever of the selector moved smoothly.
|
|
Make a control trip and be convinced that the transmission is established in the situation corresponding to each position of the lever of the selector.
|
|
|
|