Hyundai Elantra

since 2000-2004 of release

Repair and car operation



Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
+ greasing System
+ cooling System
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
- Automatic transmission
   Specifications
   Check of level of liquid in an automatic transmission
   Liquid replacement in an automatic transmission
   Check of conductivity of the switch of ranges of a transmission (F4A42)
   Switch of ranges of a transmission and adjustment of a cable of management (F4A42)
   Check of operation of the lever of the selector (A4AF3)
   Adjustment of the switch of indication of position of the lever of the selector (A4AF3)
   Check of components of an automatic transmission (F4A42)
   Testing of collaboration of an automatic transmission and the engine on the motionless car (F4A42)
   Check of pressure of transmission liquid (F4A42)
   Check of pressure of transmission liquid (А4AF3)
   Diagnostics function
   Diagnostic codes
   Adjustment of an axial gap of a reactionary brake (F4A42)
   Adjustment of an axial gap of a brake of the second transfer (F4A42)
   Adjustment of an axial gap of a brake of low transfer and transfer of a backing (F4A42)
   Adjustment of an axial gap of a solar gear wheel of lowering transfer (F4A42)
   Adjustment of preliminary loading of differential (F4A42)
   Elements of system of hydraulic management
   Identification of bearings of an automatic transmission of F4A42
   Control lamp of malfunctions (MIL)
   Identification of bearings of an automatic transmission of F4A43
   Adjustment of the servo-driver of compulsory inclusion of a low gear (А4АF3)
   Pressure adjustment in the highway (А4АF3)
   Replacement of an oil sealing ring of a power shaft
   Removal and installation of a transmission of F4A42
   Removal and installation of a transmission of A4AF3
   Management of an automatic transmission
   Interlock installation
   Installation of the device of blocking of a key
+ Power shafts, forward and back axes
+ Suspension bracket
+ Steering
+ Brake system
+ Body
+ air Central air
+ Electric equipment
Electric circuits



Check of pressure of transmission liquid (F4A42)

Check of pressure of transmission liquid is carried out to define a condition of hydraulic components and whether there are leaks.

 PERFORMANCE ORDER

    Start up the engine before transmission warming up to temperature 80–100°C. Lift the forward party of the car so that driving wheels could rotate freely.
    Connect a special manometer with an adapter to each union of check of pressure.
    Measure pressure of transmission liquid at various positions of the lever of the selector and frequency of rotation of a cranked shaft of the engine given in the table.
    If pressure does not correspond to demanded values, check and repair transmission elements.

Automatic transmission of F4A42

Condition
Standard pressure of transmission liquid, kPa
Positions of the selector
Position of the lever of the selector
Frequency of rotation of a cranked shaft, mines-1
Reduction of pressure (UD)
Back coupling (REV)
Pressure of coupling of an overdrive gear (OD)
R
2500
R
Z.Kh.
2500
1,270–1,770
N
Neytral.
D
The 1st lane.
2500
1,010–1,050
2nd Lane.
2500
1,010–1,050
3rd Lane.
2500
780–800
780–880
4th Lane.
2500
780–880

Automatic transmission F4A42 (continuation)

Standard pressure of transmission liquid, kPa
Brakes of low transfers and Z.H. (LR) Brakes of 2 transfers (2ND) Pressure of a regulator of coupling (DA) Pressure of a regulator of a damper of coupling (DR)
260–340
220–360
1,270–1,770
500–700
260–340
220–360
1,010–1,050
500–700
1,010–1,050
500–700
More than 750
450–650
780–880
More than 750
450–650

Analysis of results of check of pressure of transmission liquid (F4A42)

Malfunction sign
Possible reason
All hydraulic pressure high The cable of management is incorrectly adjusted by a transmission
The regulating valve is faulty
All hydraulic pressure low The cable of management is incorrectly adjusted by a transmission
The oil pump is faulty
The internal oil filter is polluted
The oil radiator is blocked
The regulating valve is faulty
The safety valve is faulty
The valve case is incorrectly established
Hydraulic pressure is abnormal only in position of the selector "R" The regulating valve is faulty
The opening is blocked
The valve case is incorrectly established
Hydraulic pressure is abnormal only in position of the selector "3" or "4" The regulating valve is faulty
The opening is blocked
The valve case is incorrectly established
The valve of the solenoid of an overdrive gear is faulty
The valve of regulation of pressure of an overdrive gear is faulty
The switchboard valve is faulty
Hydraulic pressure is abnormal only on lowering transfer Oil consolidation of K is damaged
Oil consolidation of L is damaged
Oil consolidation of M is damaged
Possible reason
The valve of the solenoid of lowering transfer is faulty
The valve of regulation of pressure of lowering transfer is faulty
The control ball is damaged
The opening is blocked
The valve case is incorrectly established
Hydraulic pressure is abnormal only on coupling of transfer of a backing Oil consolidation of A is damaged
Oil consolidation of B is damaged
Oil consolidation of C is damaged
The opening is blocked
The valve case is incorrectly established
Hydraulic pressure is abnormal only on an overdrive gear Oil consolidation of D is damaged
Oil consolidation of E is damaged
Oil consolidation of F is damaged
The valve of the solenoid of an overdrive gear is faulty
The valve of regulation of pressure of an overdrive gear is faulty
The control ball is damaged
The opening is blocked
The valve case is incorrectly established
Hydraulic pressure is abnormal only on low transfers and backing transfer
Oil consolidation of I is damaged
Oil consolidation of J is damaged
The valve of the solenoid of low transfers and backing transfer is faulty
The valve of regulation of pressure of low transfers and backing transfer is faulty
The switchboard valve is faulty
The safety valve of A is faulty
The control ball is damaged
The opening is blocked
The valve case is incorrectly established
Abnormally only secondary hydraulic pressure
Oil consolidation of G is damaged
Oil consolidation of H is damaged
Oil consolidation of O is damaged
The secondary solenoidal valve is faulty
The secondary valve of adjustment of pressure is faulty
The safety valve is faulty In
The opening is blocked
The valve case is incorrectly established
Abnormally only hydraulic pressure of coupling of transfer of a backing
The oil radiator is damaged
Oil consolidation of N is damaged
The valve of the solenoid of management of shock-absorber coupling is faulty
The valve of management of shock-absorber coupling is faulty
The valve of adjustment of pressure of the hydrotransformer is faulty
The opening is blocked

Pressure is put not to a functioning element
The valve case is incorrectly established
The cable of management is incorrectly adjusted by a transmission
The valve is damaged
The control ball is damaged