Liquid replacement in an automatic transmission
If liquid replacement in the hydrotransformer is carried out, also replace liquid in a transmission. If liquid replacement in the hydrotransformer is not carried out, replace liquid in a transmission as follows.
|
|
Disconnect a hose which connects a transmission and an oil radiator (from a radiator). Turn out a drain stopper from the basis of a case of a transmission and merge liquid.
Establish a drain stopper with laying and tighten the moment given in the specification. Inhaling moment: 32 N • m.
Fill in necessary amount of demanded liquid.
|
|
Stop liquid filling if the demanded quantity cannot be filled in in a transmission. |
If the bigger amount of transmission liquid was filled in repeat procedure according to a step 1.
Connect a hose which was disconnected in a step (1) and reliably insert щуп for level measurement.
Start the engine and leave it to work within 1–2 minutes in an idling mode.
At the working engine move the selector lever from the situation "N" to all provisions and back in the situation "N".
Make a trip before transmission warming up to temperature 70–80°C. Park the car on an equal horizontal surface. Check level of liquid which should be between «HOT» labels. If necessary, add necessary amount of demanded liquid.
|
|
Reliably insert щуп for measurement of level of transmission liquid.
|
|
|
|