Hyundai Elantra

since 2000-2004 of release

Repair and car operation



Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
+ greasing System
+ cooling System
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
- Automatic transmission
   Specifications
   Check of level of liquid in an automatic transmission
   Liquid replacement in an automatic transmission
   Check of conductivity of the switch of ranges of a transmission (F4A42)
   Switch of ranges of a transmission and adjustment of a cable of management (F4A42)
   Check of operation of the lever of the selector (A4AF3)
   Adjustment of the switch of indication of position of the lever of the selector (A4AF3)
   Check of components of an automatic transmission (F4A42)
   Testing of collaboration of an automatic transmission and the engine on the motionless car (F4A42)
   Check of pressure of transmission liquid (F4A42)
   Check of pressure of transmission liquid (А4AF3)
   Diagnostics function
   Diagnostic codes
   Adjustment of an axial gap of a reactionary brake (F4A42)
   Adjustment of an axial gap of a brake of the second transfer (F4A42)
   Adjustment of an axial gap of a brake of low transfer and transfer of a backing (F4A42)
   Adjustment of an axial gap of a solar gear wheel of lowering transfer (F4A42)
   Adjustment of preliminary loading of differential (F4A42)
   Elements of system of hydraulic management
   Identification of bearings of an automatic transmission of F4A42
   Control lamp of malfunctions (MIL)
   Identification of bearings of an automatic transmission of F4A43
   Adjustment of the servo-driver of compulsory inclusion of a low gear (А4АF3)
   Pressure adjustment in the highway (А4АF3)
   Replacement of an oil sealing ring of a power shaft
   Removal and installation of a transmission of F4A42
   Removal and installation of a transmission of A4AF3
   Management of an automatic transmission
   Interlock installation
   Installation of the device of blocking of a key
+ Power shafts, forward and back axes
+ Suspension bracket
+ Steering
+ Brake system
+ Body
+ air Central air
+ Electric equipment
Electric circuits



Diagnostics function

 PERFORMANCE ORDER

  1. Connect the HI-SCAN scanner to the diagnostic socket.
  2. Consider codes of malfunctions.
  • In memory (RAM) 8 codes of malfunctions in sequence of their emergence can be written down.
  • The same diagnostic code of malfunction cannot be written down so many time, how many malfunction there is in one and too time.
  • If there are malfunctions after in memory 8 codes of malfunctions are written down, codes of malfunctions, since codes which were written down first of all will be erased.
  1. If the system is activated and the transmission is blocked on the third transfer, in RAM the diagnostic code of malfunction will be written down. In this case three diagnostic codes of malfunction can be written down in memory.
  2. Cancellation will occur if, to a transmission blocked on the third transfer, the ignition key will turn in the situation OFF, and the diagnostic code of malfunction is written down in RAM.
  3. Storing of codes of diagnostics.
    • To 8 elements of the diagnosis and 3 points it can be remembered.
    • If the capacity of the store is exceeded the diagnosis and points will be rewritten since codes which were written down first of all.
    • The code is not remembered several times.
  4. Removal of codes of diagnostics.
    1) Automatic removal
    All codes of diagnostics are removed from memory through 200 times after ATF temperature досягает 50°C after storing of the freshest code of diagnostics.
    2) Compulsory removal.
    Remembered codes of diagnostics can be removed, using the HI-SCAN scanner if the following conditions are satisfied:
    • ignition is included;
    • there are no impulses from the sensor of an angle of rotation of a cranked shaft;
    • there are no impulses from the sensor of frequency of rotation of a conducted shaft;
    • there are no impulses from the sensor of speed of the car;
    • function of malfunctions does not work.