Hyundai Elantra

since 2000-2004 of release

Repair and car operation



Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
+ greasing System
+ cooling System
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
- Steering
   Specifications
   Check of a free wheeling of a steering wheel
   Check of an angle of rotation of forward wheels
   Check of a torque of a pin of the spherical hinge of a tip of steering draft
   Check of effort of turn of a steering wheel
   Check of return of a steering wheel in a starting position
   Check of a tension of a belt of a drive of the pump of the power steering
   Check of level of liquid
   Liquid replacement in a hydraulic drive of the power steering
   Pumping of hydraulic system of the amplifier of a steering
   Check of pressure of liquid in hydraulic system
   Steering column/helmsman shaft
   Removal and installation of the lock of a steering column
   Steering transfer
   Hoses of the amplifier of a steering
   Filling with liquid of the mechanism of the amplifier of a steering
   Pump of the amplifier of a steering
   Search and elimination of malfunctions of a steering
+ Brake system
+ Body
+ air Central air
+ Electric equipment
Electric circuits



Steering

Specifications

Steering with the amplifier

Name
Specification
Steering shaft
With the kardanny hinge and tilt angle adjustment
Steering transfer
Gear lath and gear wheel
Course of a gear lath
144±1 mm
Type of the pump of the amplifier of a steering
Lopastna
Turn of a steering wheel from an emphasis against the stop
3,15
Productivity of the pump, cm3
9,6

Adjusting data

Data
Value
Люфт steering wheel, mm
0–30
Angle of rotation of wheels

– internal wheel

40°1' ± 2 °

– external wheel

33°45'
Effort of turn of a steering wheel, N
29
Deflection of a belt of a drive of the pump of the amplifier of a steering by pressing with effort of 98 N
6–9 mm
The pressure created by the pump, MPa
8,3–8,8
Full preliminary loading of a gear wheel, N • m
0,6–1,3
Moment of turn of a steering wheel, N • m
2–5

Lubricants

Data
Value
Bearing of a steering shaft ALVANIA 2 or 3 (KEUK DONG SHELL)
Spherical hinge of a tip of steering draft SHOWA SUNLIGHT MB–2 or equivalent
Case of steering transfer ONE–LUBER RP GREASE (KYODOYUSHI, JAPAN)
Internal spherical hinge of steering transfer LONG TIME PD2 (OPTIMOL, GERMAN)
Contact surface of a protective cover of steering transfer Silicone greasing (SPEC NO: MS511–41)
Liquid for the power steering Liquid for the power steering (PSF–3), 0,75–0,8 l

Moments of an inhaling, N • m

Data
Value
Nut of fastening of a steering wheel
35–45
Arm of fastening of a steering column
13–18
Steering shaft to the hinge
15–20
Gear wheel shaft to the hinge
15–20
Bolt of fastening of a protective cover
17–26
Bolts of fastening of steering transfer
60–80
Lock-nut of a tip of steering draft
50–55
Stopper lock-nut
24–34
Tip of steering bent for to a gear lath
80–100
The valve case to the case of a gear lath
20–30
Clip of fastening of a tube of giving and return to steering transfer
12–18
Самоконтрящаяся nut of transfer and returnable valve
20–30
Directing pipe
12–18
The oil pump to an arm
35–50
Arm of the oil pump to the engine
35–50
Pressure head hose to the oil pump
55–65
Bolt of fastening of an oil tank
4–6

General information

The steering consists of a steering wheel, a steering column, steering tooth reechny gearing and steering drafts. The steering wheel is fixed on a shaft of a steering column and transfers effort to tooth reechny gearing.

From each party the gear lath of steering transfer is connected by the spherical hinge to cross-section steering draft. Steering drafts transfer effort through steering tips and rotary fists to forward wheels. Such design of a steering has an easy course at absence люфта at turn of a steering wheel from an emphasis against the stop.

For simplification of turn of a steering wheel establish the hydraulic amplifier of a steering consisting of the pump of the amplifier of a steering, put in action a belt from a cranked shaft, a tank with liquid, hoses and tubes, and steering transfer.