Hyundai Elantra

since 2000-2004 of release

Repair and car operation



Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
+ greasing System
+ cooling System
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
- Steering
   Specifications
   Check of a free wheeling of a steering wheel
   Check of an angle of rotation of forward wheels
   Check of a torque of a pin of the spherical hinge of a tip of steering draft
   Check of effort of turn of a steering wheel
   Check of return of a steering wheel in a starting position
   Check of a tension of a belt of a drive of the pump of the power steering
   Check of level of liquid
   Liquid replacement in a hydraulic drive of the power steering
   Pumping of hydraulic system of the amplifier of a steering
   Check of pressure of liquid in hydraulic system
   Steering column/helmsman shaft
   Removal and installation of the lock of a steering column
   Steering transfer
   Hoses of the amplifier of a steering
   Filling with liquid of the mechanism of the amplifier of a steering
   Pump of the amplifier of a steering
   Search and elimination of malfunctions of a steering
+ Brake system
+ Body
+ air Central air
+ Electric equipment
Electric circuits



Check of return of a steering wheel in a starting position

Check that the steering wheel comes back to a starting position.

 PERFORMANCE ORDER

    Force which is necessary for putting for turn of a steering wheel and return of a wheel to a starting position, should be same, as well as for passing of moderate turns and turns.
    When the steering wheel is turned on 90 ° and detained in this situation within several seconds while the car moves with speed of 35 km/h, after an otpuskaniye the steering wheel should come back within 20 ° from neutral situation.

If the steering wheel turns very quickly, during the first moment the effort necessary for turn, can be increased. This normal phenomenon, especially on at operation of the engine idling as productivity of the pump is a little reduced.