Hyundai Elantra

since 2000-2004 of release

Repair and car operation


Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
+ greasing System
+ cooling System
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
- Steering
   Specifications
   Check of a free wheeling of a steering wheel
   Check of an angle of rotation of forward wheels
   Check of a torque of a pin of the spherical hinge of a tip of steering draft
   Check of effort of turn of a steering wheel
   Check of return of a steering wheel in a starting position
   Check of a tension of a belt of a drive of the pump of the power steering
   Check of level of liquid
   Liquid replacement in a hydraulic drive of the power steering
   Pumping of hydraulic system of the amplifier of a steering
   Check of pressure of liquid in hydraulic system
   Steering column/helmsman shaft
   Removal and installation of the lock of a steering column
   Steering transfer
   Hoses of the amplifier of a steering
   Filling with liquid of the mechanism of the amplifier of a steering
   Pump of the amplifier of a steering
   Search and elimination of malfunctions of a steering
+ Brake system
+ Body
+ air Central air
+ Electric equipment
Electric circuits


Pumping of hydraulic system of the amplifier of a steering

 PERFORMANCE ORDER

    Fill in the recommended liquid in a tank of the amplifier of a steering to a label "MOVE". Lift forward wheels. Disconnect a high-voltage wire from the ignition coil. Periodically include a starter on 15-20 with and thus 5–6 times turn a steering wheel from an emphasis against the stop.
  1. In the course of pumping constantly add liquid that its level in a tank did not fall below a filter installation site.
  2. If pumping to execute, when the cranked shaft of the engine does not rotate, air will be again dissolved in liquid.
    Connect a high-voltage wire to the ignition coil, start up the engine and leave it to work at frequency of rotation of idling. Turn a steering wheel from an emphasis against the stop several times. Check that liquid does not foam and its level did not go down.

To exclude damages, do not hold the steering wheel turned against the stop within more than 10 seconds.

    Check that liquid has no dairy color and its level is between «MIN» and «MAX» labels on a tank. Check that there is a little change of level of liquid at turn of a steering wheel in the left and right parties.
  1. If level of liquid changes more than 5 mm, repeat pumping of hydraulic system of the amplifier of a steering.
  2. If level of liquid raises suddenly after an engine stop, means, in system still there is an air.
  3. If in a hydraulic drive of the amplifier of a steering there is an air, at operation of the pump extraneous noise will be audible. Air in system will reduce a resource of operation of the pump and other parts.