Hyundai Elantra

since 2000-2004 of release

Repair and car operation



Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
+ greasing System
+ cooling System
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
- Steering
   Specifications
   Check of a free wheeling of a steering wheel
   Check of an angle of rotation of forward wheels
   Check of a torque of a pin of the spherical hinge of a tip of steering draft
   Check of effort of turn of a steering wheel
   Check of return of a steering wheel in a starting position
   Check of a tension of a belt of a drive of the pump of the power steering
   Check of level of liquid
   Liquid replacement in a hydraulic drive of the power steering
   Pumping of hydraulic system of the amplifier of a steering
   Check of pressure of liquid in hydraulic system
   Steering column/helmsman shaft
   Removal and installation of the lock of a steering column
   Steering transfer
   Hoses of the amplifier of a steering
   Filling with liquid of the mechanism of the amplifier of a steering
   Pump of the amplifier of a steering
   Search and elimination of malfunctions of a steering
+ Brake system
+ Body
+ air Central air
+ Electric equipment
Electric circuits



Hoses of the amplifier of a steering


At connection of a pipe and a hose be convinced that combined labels of white color on each element.

Pressure head hose and pipe

 PERFORMANCE ORDER

  1. Remove an airintaking branch pipe.
  1. Remove a clip of fastening of a pressure head hose.
  1. Disconnect a pipe fitting from steering transfer.
  2. Lift the car and remove a clip, fixing pressure head and returnable tubes.
  1. Lower the car and remove a connector (24 mm).
  1. Remove a pressure head hose and a tube.
  1. Installation is carried out to sequences, return to removal.
  1. Establish a pressure head hose and a tube so that they were not overwound and did not concern mobile elements of the car.
  2. Pump over a hydraulic drive of the amplifier of a steering.

Returnable hose and pipe

 PERFORMANCE ORDER

  1. Remove from an arm a tank of the amplifier of a steering.
  1. Remove clips of fastening of a returnable pipe and a hose.
  1. Remove an airintaking branch pipe.
  1. Disconnect a pressure head pipe and a fitting of a returnable pipe from steering transfer.
  1. Lift the car and remove a clip, fixing pressure head and returnable tubes.
  1. Lower the car and remove a clip of fastening of a returnable tube and a hose.
  1. Installation is carried out to sequences, return to removal.
  1. Establish a returnable hose and a tube so that they were not overwound and did not concern mobile elements of the car.
  2. Pump over a hydraulic drive of the amplifier of a steering.

Check

 PERFORMANCE ORDER

  1. Manually braiding a hose, check it on absence of damages or cracks.
  2. Be convinced that there is no contact between a hose and other elements of the car.