Hyundai Elantra

since 2000-2004 of release

Repair and car operation



Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
+ greasing System
+ cooling System
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
- Steering
   Specifications
   Check of a free wheeling of a steering wheel
   Check of an angle of rotation of forward wheels
   Check of a torque of a pin of the spherical hinge of a tip of steering draft
   Check of effort of turn of a steering wheel
   Check of return of a steering wheel in a starting position
   Check of a tension of a belt of a drive of the pump of the power steering
   Check of level of liquid
   Liquid replacement in a hydraulic drive of the power steering
   Pumping of hydraulic system of the amplifier of a steering
   Check of pressure of liquid in hydraulic system
   Steering column/helmsman shaft
   Removal and installation of the lock of a steering column
   Steering transfer
   Hoses of the amplifier of a steering
   Filling with liquid of the mechanism of the amplifier of a steering
   Pump of the amplifier of a steering
   Search and elimination of malfunctions of a steering
+ Brake system
+ Body
+ air Central air
+ Electric equipment
Electric circuits



Steering column/helmsman shaft

Removal

 PERFORMANCE ORDER

  1. Disconnect a wire from the negative plug of the storage battery.
  2. Remove a safety cushion of the driver.

On cars not equipped with a safety cushion of the driver remove the button of inclusion of a sound signal.

  1. Unscrew a nut of fastening of a steering wheel.
  1. Put combination labels on an end face of a steering shaft and a steering wheel and a stripper remove a steering wheel.
  1. Turn out screws and remove casings of a steering column.
  1. Disconnect from the multipurpose switch electric sockets.
  1. Turn out three bolts and remove the multipurpose switch.
  1. Turn out four bolts and remove the bottom protection against collision.
  1. Turn out five bolts of connencting a steering shaft and the universal hinge.
  1. Turn out bolts and remove a steering column and a shaft together with the universal hinge.