since 2000-2004 of release
Repair and car operation
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
- Greasing system
Check of level of engine oil
Replacement of engine oil
Replacement of the oil filter
Choice of engine oil
Oil pump of petrol engines
Oil pump of diesel engines
Oil radiator of diesel engines
+ cooling System
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
+ Brake system
+ air Central air
+ Electric equipment
The system of greasing consists of the oil pallet, the oil pump, the oil filter and various channels.
The oil pump is put in action from a cranked shaft. Perepuskna the valve in the oil pump supports pressure in system of greasing of the engine at a certain level, At its excess the valve and a part of oil opens perepuskny flows down back in the oil pallet.
In the filter there is perepuskny a valve through which in case of strong pollution of the filter crude oil arrives at once to the oil highway. The oil cleared by the oil filter arrives to the trunk oil main.
Further the stream of oil is divided into two streams. One stream of oil moves to radical bearings of a cranked shaft, and via the drilled channels greases also shatunny bearings. For cooling of pistons oil through sprays is sprayed on the lower part of pistons.
The second stream of oil on channels moves to a head of the block of cylinders for greasing of bearings of camshafts and in hydraulic pushers.
After passing through a head and the block of cylinders, oil flows down in the oil pallet.
System of greasing of engines 1,8 and 2,0 of l
System of greasing of engines of 1,6 l
System of greasing of diesel engines of 2,0 l
Moments of an inhaling of carving connections of petrol engines, N • m
Moments of an inhaling of carving connections of diesel engines, N • m