Hyundai Elantra

since 2000-2004 of release

Repair and car operation



Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
- Greasing system
   Specifications
   Check of level of engine oil
   Replacement of engine oil
   Replacement of the oil filter
   Choice of engine oil
   Oil pump of petrol engines
   Oil pump of diesel engines
   Oil radiator of diesel engines
+ cooling System
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
+ Steering
+ Brake system
+ Body
+ air Central air
+ Electric equipment
Electric circuits



Replacement of engine oil

At replacement of engine oil be careful, as oil hotter and it is possible to burn.


 PERFORMANCE ORDER

  1. Warm up the engine to normal working temperature and switch off it.
  2. Stop the engine.
  1. Uncover a maslonalivny mouth and turn out a stopper oil plum from the oil pallet. Wait, while all oil will not flow down from the oil pallet.
  1. Screw a stopper oil plum with new laying. Inhaling moments: 35–45 N • m.
  2. Fill in in the engine necessary amount of demanded engine oil.

Volume of engine oil:

Engines of 2,0/1,8 l

Without replacement of the oil filter: 3,5 l
With replacement of the oil filter: 3,7 l

Engine of 1,6 l

Without replacement of the oil filter: 3,0 l
With replacement of the oil filter: 3,3 l

Diesel engine of 2,0 l

Without replacement of the oil filter: 5,4 l
Oil filter: 0,5 l
With replacement of the oil filter: 5,9 l

Do not pour oil as it will lead to foaming of oil and pressure reduction in greasing system.

  1. Establish a cover on a maslonalivny mouth.
  2. Start up the engine and check absence of leakages of oil.
  3. Check level of engine oil and, if necessary, finish it to norm.