Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
+ greasing System
+ cooling System
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
- Steering
Specifications
Check of a free wheeling of a steering wheel
Check of an angle of rotation of forward wheels
Check of a torque of a pin of the spherical hinge of a tip of steering draft
Check of effort of turn of a steering wheel
Check of return of a steering wheel in a starting position
Check of a tension of a belt of a drive of the pump of the power steering
Check of level of liquid
Liquid replacement in a hydraulic drive of the power steering
Pumping of hydraulic system of the amplifier of a steering
Check of pressure of liquid in hydraulic system
Steering column/helmsman shaft
Removal and installation of the lock of a steering column
Steering transfer
Hoses of the amplifier of a steering
Filling with liquid of the mechanism of the amplifier of a steering
Pump of the amplifier of a steering
Search and elimination of malfunctions of a steering
+ Brake system
+ Body
+ air Central air
+ Electric equipment
Electric circuits
|
Check of effort of turn of a steering wheel
|
|
On the car standing on a firm horizontal surface, establish forward wheels for rectilinear movement.
Increase frequency of rotation of a cranked shaft of the engine to 1000±100 mines-1.
|
|
After check leave the engine to work at frequency of rotation of idling |
|
|
Hook on a dynamometer for a spoke of a steering wheel in a place which is most remote from the center of a wheel. With the forward wheels established for rectilinear movement, measure effort which is necessary for putting to a steering wheel for turn of wheels to the left and to the right on 1/4 turns.
Effort: 29 N.
|
Check that at turn of a steering wheel the application of excessive efforts is not demanded.
If the measured effort exceeds demanded value, carry out the following checks:
– check on absence of damage protective covers of spherical hinges of the bottom lever and a tip of steering draft;
– a torque which is necessary for putting for a provorachivaniye of a pin of the spherical hinge of a tip of steering draft;
– a torque which is necessary for putting for a provorachivaniye of a pin of the spherical hinge of the bottom lever.
|
|
|
|