Hyundai Elantra

since 2000-2004 of release

Repair and car operation



Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
+ greasing System
+ cooling System
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
- Steering
   Specifications
   Check of a free wheeling of a steering wheel
   Check of an angle of rotation of forward wheels
   Check of a torque of a pin of the spherical hinge of a tip of steering draft
   Check of effort of turn of a steering wheel
   Check of return of a steering wheel in a starting position
   Check of a tension of a belt of a drive of the pump of the power steering
   Check of level of liquid
   Liquid replacement in a hydraulic drive of the power steering
   Pumping of hydraulic system of the amplifier of a steering
   Check of pressure of liquid in hydraulic system
   Steering column/helmsman shaft
   Removal and installation of the lock of a steering column
   Steering transfer
   Hoses of the amplifier of a steering
   Filling with liquid of the mechanism of the amplifier of a steering
   Pump of the amplifier of a steering
   Search and elimination of malfunctions of a steering
+ Brake system
+ Body
+ air Central air
+ Electric equipment
Electric circuits



Check of a tension of a belt of a drive of the pump of the power steering

 PERFORMANCE ORDER

  1. Check a belt tension, having pressed on it effort of 98 N (10 kg) in a place located on identical removal from pulleys, and measure a belt deflection. Belt deflection: 6–9 mm.
  1. If the tension of a belt does not correspond demanded, adjust it as follows.

1) Weaken a bolt of adjustment of a tension of a belt of a drive of the pump of the power steering.

2) The mount inserted between an arm and the pump, adjust a belt tension so that the deflection of a belt was in admissible limits.

3) Tighten a bolt of adjustment of a tension of a belt of a drive of the pump of the power steering.
4) Check tension of a belt and, if necessary, repeat adjustment.

Turn a cranked shaft of the engine and repeatedly check a belt tension.