Hyundai Elantra

since 2000-2004 of release

Repair and car operation


Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
+ greasing System
+ cooling System
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
- Automatic transmission
   Specifications
   Check of level of liquid in an automatic transmission
   Liquid replacement in an automatic transmission
   Check of conductivity of the switch of ranges of a transmission (F4A42)
   Switch of ranges of a transmission and adjustment of a cable of management (F4A42)
   Check of operation of the lever of the selector (A4AF3)
   Adjustment of the switch of indication of position of the lever of the selector (A4AF3)
   Check of components of an automatic transmission (F4A42)
   Testing of collaboration of an automatic transmission and the engine on the motionless car (F4A42)
   Check of pressure of transmission liquid (F4A42)
   Check of pressure of transmission liquid (А4AF3)
   Diagnostics function
   Diagnostic codes
   Adjustment of an axial gap of a reactionary brake (F4A42)
   Adjustment of an axial gap of a brake of the second transfer (F4A42)
   Adjustment of an axial gap of a brake of low transfer and transfer of a backing (F4A42)
   Adjustment of an axial gap of a solar gear wheel of lowering transfer (F4A42)
   Adjustment of preliminary loading of differential (F4A42)
   Elements of system of hydraulic management
   Identification of bearings of an automatic transmission of F4A42
   Control lamp of malfunctions (MIL)
   Identification of bearings of an automatic transmission of F4A43
   Adjustment of the servo-driver of compulsory inclusion of a low gear (А4АF3)
   Pressure adjustment in the highway (А4АF3)
   Replacement of an oil sealing ring of a power shaft
   Removal and installation of a transmission of F4A42
   Removal and installation of a transmission of A4AF3
   Management of an automatic transmission
   Interlock installation
   Installation of the device of blocking of a key
+ Power shafts, forward and back axes
+ Suspension bracket
+ Steering
+ Brake system
+ Body
+ air Central air
+ Electric equipment
Electric circuits


Adjustment of an axial gap of a brake of low transfer and transfer of a backing (F4A42)

Include transfer of a backing and measure a gap. For measurement of an axial gap move the special tool up and down. Axial gap: 1,35–1,81 mm.

Choose press a disk which thickness should be in the following limits.
From [(value of moving) + thickness of the special tool – 1,81] to [(value of moving) + thickness of the special tool – 1,35].