Hyundai Elantra

since 2000-2004 of release

Repair and car operation



Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
+ greasing System
+ cooling System
- Fuel system
   - Fuel system of petrol engines
      Specifications
      Search and elimination of malfunctions
      Check of frequency of rotation of idling
      Check of the fuel pump
      Replacement of the fuel filter
      Replacement of the limiter of overflow (the double-thread valve)
      Fuel level sensor replacement
      Checks of system of injection of MFI
      Control lamp of malfunctions (MIL)
      Diagnostic codes of malfunctions
      Sensors
      Fuel nozzles
      Modulator of management of frequency of rotation of a cranked shaft of the engine idling (ISC)
      Sensor of speed of the car (VSS)
      Sensor of a detonation (KS)
      The lock of ignition (ST) and the switch of ranges (TR) in cars with an automatic transmission
      The lock of ignition (ST) in cars with a mechanical transmission
      Control unit engine
      Switch and relay of central air of air
      Electromagnetic valve of cleaning of the canister of system of catching паров fuels (EVAP)
      Main MFI relay
      Ignition coil
      Fuel pump
      Sensor of acceleration of APS
      Oil valve (OCV)
      Fuel highway and nozzles
      Throttle knot
      Fuel tank
      Pedal and accelerator cable
   + Fuel system of diesel engines
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
+ Steering
+ Brake system
+ Body
+ air Central air
+ Electric equipment
Electric circuits



Fuel tank

Removal

  • Gasoline is explosive, therefore at work with elements of fuel system provide normal ventilation of a workplace, do not use fire, the sparking devices opened by fire-dangerous light devices and do not smoke.
  • Before removal of a fuel tank, merge from it fuel. Clear a fuel tank from паров fuels.
  • Uncover a toplivonalivny mouth of a fuel tank to level pressure in a tank with atmospheric pressure.

 PERFORMANCE ORDER

  1. Remove a pillow of back sitting and disconnect the socket of the fuel pump.
  1. Start up the engine and leave it to work till a stop connected with lack of fuel in the distributive fuel highway. As a result of the executed actions pressure in fuel system is removed.

For an exception of a razbryzgivaniye of fuel close a place of separation of fuel system pure rags and, being careful, smoothly separate pipelines.

  1. Disconnect a "weight" wire from the storage battery.
  1. Disconnect the top pressure head hose from the party of an exit of the fuel filter and a wire of removal of a static electricity.
  2. Lift the car.
  3. Disconnect a hose from a toplivonalivny mouth and a hose of alignment of pressure паров fuels.
  1. Support a fuel tank a jack.
  1. Unscrew самоконтрящиеся nuts and remove tapes of fastening of a fuel tank.
  1. Remove a fuel tank.

Close all opened openings of a fuel tank to exclude an exit from a tank паров fuels.

Even in an empty fuel tank there are pairs of fuel which are explosive therefore be careful. Provide normal ventilation of a workplace, do not use fire, the sparking devices opened by fire-dangerous light devices and do not smoke. As soon as possible clear a fuel tank from паров fuels.

Check

 PERFORMANCE ORDER

  1. Check hoses and pipes on lack of cracks, an excess, deformation, aging and a contamination.
  2. Check functioning of a cover of a jellied mouth of a fuel tank.
  3. Clear a tank and check it on existence of traces of a rust, damages and cracks. Damaged or treated it is necessary for corrosion action to replace a fuel tank.
  4. Check an internal surface of a fuel tank on existence of pollution.
  5. Check the fuel filter on lack of a contamination or damages.
  6. Check operability of the limiter of overflow (the double-thread valve).
  1. Check operability of the double-thread valve, blowing it from two parties.

Installation

 PERFORMANCE ORDER

  1. Establish a fuel tank and fix it tapes.
  1. Connect compensating hose to a mouth of a fuel tank, having pulled it approximately over 40 mm.
  1. At connection of a hose of a filler it is necessary to connect the end with shorter direct pipe сл the parties of a fuel tank.
  1. Connect a hose of system of catching паров fuels and a returnable hose. Attach a hose of supply of fuel as is shown in drawing.
  1. For connection of a pressure head hose with the fuel pump, temporarily tighten cap nuts by hand, then tighten them the moment of the inhaling recommended by the specification. At a tightening of nuts be careful not to bend or to overwind a tube and to avoid damage of the fuel pump.
  1. Connect the socket of the electric fuel pump.