Hyundai Elantra

since 2000-2004 of release

Repair and car operation

Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
+ greasing System
+ cooling System
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
+ Steering
- Brake system
   Check of the vacuum amplifier of brakes
   Check of the unilateral vacuum valve
   Pumping of hydraulic system of a drive of brakes
   Adjustment of a course of the parking brake
   Brake pedal
   Vacuum amplifier of brakes
   Main brake cylinder
   Replacement of forward brake shoes
   Support of a forward brake
   Back disk brakes
   Back drum-type brakes
   Replacement of the working brake cylinder
   Pressure regulator
   Brake tubes and hoses
   Parking brake
   Anti-blocking system of brakes (ABS)
   Hydraulic HECU block
   Sensor of frequency of rotation of a wheel
   Pumping of hydraulic system of a drive of brakes with scanner use
   Search and elimination of malfunctions
+ Body
+ air Central air
+ Electric equipment
Electric circuits

Brake pedal



    Remove the switch of stoplights.
    Remove шплинт and remove a pin with a head and an opening under шплинт.
    Unscrew nuts with a fillet of fastening of an arm of a pedal of a brake. Remove knot of a pedal of a brake.



    Check the plug on lack of wear. Check a brake pedal on lack of curvatures. Check a spring of return of a pedal of a brake on absence of damages.
    Check the switch of stoplights
    1) An ohmmeter connected to plugs of the switch of stoplights, check its conductivity.
    2) By pressing of a plunzher conductivity should be absent and appear at release of a plunzher.


Installation is carried out to sequences, return to removal.

Be convinced that established шплинт on a pin with a head and an opening under шплинт drafts of a pedal of a brake.


    Establish knot of a pedal of a brake and fix nuts with a fillet and a bolt. Inhaling moment: 13–16 N • m.
    Check and, if necessary, adjust height of installation of a pedal and a free wheeling of a pedal of a brake. Establish the switch of stoplights.