Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
+ greasing System
+ cooling System
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
+ Steering
- Brake system
Specifications
Check of the vacuum amplifier of brakes
Check of the unilateral vacuum valve
Pumping of hydraulic system of a drive of brakes
Adjustment of a course of the parking brake
Brake pedal
Vacuum amplifier of brakes
Main brake cylinder
Replacement of forward brake shoes
Support of a forward brake
Back disk brakes
Back drum-type brakes
Replacement of the working brake cylinder
Pressure regulator
Brake tubes and hoses
Parking brake
Anti-blocking system of brakes (ABS)
Hydraulic HECU block
Sensor of frequency of rotation of a wheel
Pumping of hydraulic system of a drive of brakes with scanner use
Search and elimination of malfunctions
+ Body
+ air Central air
+ Electric equipment
Electric circuits
|
Hydraulic HECU block
Removal
|
|
Disconnect from the HECU block brake tubes.
|
|
Turn out bolts of fastening of an arm and remove the HECU block together with an arm.
|
|
|
- Do not assort the hydraulic HECU block.
- Transportation of the HECU block is necessary for carrying out in vertical situation with the openings of the block closed by suitable caps as brake liquid should not merge from the block.
|
|
|
Disconnect the socket from the HECU block.
|
|
|
Installation
|
|
Installation is carried out to sequences, return to removal.
Tighten bolts of fastening of the modulator and a nut of fastening of brake tubes the demanded moments of an inhaling.
Inhaling moments:
Bolt of fastening of the HECU block: 8–10 N • m
Connecting nuts of fastening of brake tubes: 13–17 N • m
|
|
|
|