Hyundai Elantra

since 2000-2004 of release

Repair and car operation


Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
+ greasing System
+ cooling System
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
+ Steering
- Brake system
   Specifications
   Check of the vacuum amplifier of brakes
   Check of the unilateral vacuum valve
   Pumping of hydraulic system of a drive of brakes
   Adjustment of a course of the parking brake
   Brake pedal
   Vacuum amplifier of brakes
   Main brake cylinder
   Replacement of forward brake shoes
   Support of a forward brake
   Back disk brakes
   Back drum-type brakes
   Replacement of the working brake cylinder
   Pressure regulator
   Brake tubes and hoses
   Parking brake
   Anti-blocking system of brakes (ABS)
   Hydraulic HECU block
   Sensor of frequency of rotation of a wheel
   Pumping of hydraulic system of a drive of brakes with scanner use
   Search and elimination of malfunctions
+ Body
+ air Central air
+ Electric equipment
Electric circuits


Pumping of hydraulic system of a drive of brakes with scanner use

Any hydraulic system works normally if air is removed from it.

 PERFORMANCE ORDER

    Uncover a compensatory tank with brake liquid.

When pumping under pressure do not press a brake pedal

Recommended brake liquid: DOT3 or DOT4.

    Unscrew a cover from the union of pumping and attach to it one end of a transparent hose, and other end of a hose insert into the glass capacity of sufficient volume half filled with brake liquid.
    Connect the scanner to the diagnostic socket located under the dashboard.
    According to the maintenance instruction of the scanner choose the corresponding parameter.

Consider the maximum working hours of work of ABS at work with the scanner to exclude a peregoraniye of the electric motor of the pump.

1) Establish hyundai firm of the producer of the car.

2) Establish the car name.
3) Establish a mode of check of anti-blocking system of brakes
4) Establish a way of removal of air.

5) Press «YES1» to involve the pump with the electric motor and the electromagnetic valve.

6) Wait 60 with before operation of removal of air as, otherwise, it is possible to damage the electric motor.

    Slowly press a brake pedal several times. At the pressed pedal of a brake a key weaken the union of pumping and wait, brake liquid without air vials yet will not start to leave. Tighten the union of pumping and release a brake pedal. Repeat a step 5 for air removal from brake mechanisms of other wheels.
    Tighten the pumping union. Inhaling moment: 7–9 N • m.