Hyundai Elantra

since 2000-2004 of release

Repair and car operation



Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
+ greasing System
+ cooling System
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
+ Steering
- Brake system
   Specifications
   Check of the vacuum amplifier of brakes
   Check of the unilateral vacuum valve
   Pumping of hydraulic system of a drive of brakes
   Adjustment of a course of the parking brake
   Brake pedal
   Vacuum amplifier of brakes
   Main brake cylinder
   Replacement of forward brake shoes
   Support of a forward brake
   Back disk brakes
   Back drum-type brakes
   Replacement of the working brake cylinder
   Pressure regulator
   Brake tubes and hoses
   Parking brake
   Anti-blocking system of brakes (ABS)
   Hydraulic HECU block
   Sensor of frequency of rotation of a wheel
   Pumping of hydraulic system of a drive of brakes with scanner use
   Search and elimination of malfunctions
+ Body
+ air Central air
+ Electric equipment
Electric circuits



Pumping of hydraulic system of a drive of brakes

 PERFORMANCE ORDER

  1. Uncover a compensatory tank and fill it with brake liquid.

Brake liquid dissolves paint, plastic and isolation of wires therefore at casual hit of liquid on a paint and varnish covering of the car or its components wash out them a large amount of water.

When pumping under pressure do not press a brake pedal

  1. Unscrew a cover from the union of pumping of the working brake cylinder and attach to it one end of a transparent hose, and other end of a hose insert into the glass capacity of sufficient volume half filled with brake liquid.
  2. Slowly press a brake pedal several times.
  1. At the pressed pedal of a brake a key weaken the union of pumping and let the air out from hydraulic system. Tighten the union of pumping and release a brake pedal.
  1. Repeat operations 3 and 4 until there will be a brake liquid without air vials.
  2. Tighten the pumping union. Inhaling moment: 7–9 N • m.
  1. Removal of air carry out in the sequence shown in drawing.