Hyundai Elantra

since 2000-2004 of release

Repair and car operation



Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
- Diesel engine of 2,0 l
   Specifications
   Compression check
   Adjustment of a tension of a gear belt
   Gear belt
   Cover of a head of cylinders and stopper
   Camshaft
   Balancing shaft
   Repair of a head of cylinders
   Engine support
   Elements of support which are subject to check
   Block of cylinders
   Removal and engine and transmission installation
   Cranked shaft
   Piston
   Turbokompressor
   Cooler of inflated air
   Air filter (ACL)
   System of production of the fulfilled gases
   Search and elimination of malfunctions
+ greasing System
+ cooling System
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
+ Steering
+ Brake system
+ Body
+ air Central air
+ Electric equipment
Electric circuits



Adjustment of a tension of a gear belt

 PERFORMANCE ORDER

    Check a condition of a poliklinovy belt and its arrangement on pulleys.
    Establish a belt on engine pulleys in the following order: Generator pulley => Pulley of the pump of the amplifier of a steering => Intermediate pulley => Pulley of the compressor of the conditioner => Pulley of a cranked shaft
    At belt installation on pulleys be convinced that it is correctly established in pulley flutes.
  1. Check correctness of an arrangement of edges of a poliklinovy belt in flutes of pulleys.
  2. If at work poliklinovy the belt publishes extraneous noise, check a belt on lack of wear and damages, and also working surfaces of pulleys.
    The label of the mechanism of a tension should be between situation «*». Otherwise replace a belt.