Hyundai Elantra

since 2000-2004 of release

Repair and car operation



Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
- Diesel engine of 2,0 l
   Specifications
   Compression check
   Adjustment of a tension of a gear belt
   Gear belt
   Cover of a head of cylinders and stopper
   Camshaft
   Balancing shaft
   Repair of a head of cylinders
   Engine support
   Elements of support which are subject to check
   Block of cylinders
   Removal and engine and transmission installation
   Cranked shaft
   Piston
   Turbokompressor
   Cooler of inflated air
   Air filter (ACL)
   System of production of the fulfilled gases
   Search and elimination of malfunctions
+ greasing System
+ cooling System
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
+ Steering
+ Brake system
+ Body
+ air Central air
+ Electric equipment
Electric circuits



Cover of a head of cylinders and stopper

Removal

 PERFORMANCE ORDER

  1. Pull and turn to the right the stopper handle.
  1. Get a stopper from a cover. After use of a stopper turn the handle (–) for increase in a gap between a cover of a head of cylinders and a stopper.

Installation

 PERFORMANCE ORDER

  1. Grease with engine oil a sealing ring of a stopper.
  1. Insert a stopper into an opening of a cover of a head of cylinders and turn it to the left.

At installation always use new jams.

  1. The special tool 09351-27400 establish oil consolidation of a fuel nozzle.
  1. The demanded moment tighten bolts of fastening of a cover. Inhaling moment: 8–10 N • m.