Hyundai Elantra

since 2000-2004 of release

Repair and car operation



Elantr's Hyundai
- Petrol engines 1,6, 1,8 and 2,0 of l
   Compression check
   Gear belt
   Adjustment of a tension of a gear belt
   Adjustment of a tension of a poliklinovy belt
   Adjustment of a tension of a belt of a drive of the generator
   Camshafts
   Check and adjustment of gaps of valves on engines 1,8 and 2,0 of l (MLA)
   Hydraulic jacks of gaps of valves of the engine of 1,6 l
   Installation of a cover of a head of cylinders
   Directing to a chain
   Chain
   Installation of camshafts
   The mechanism of change of the moment of opening and closing of valves (CVVT) on l engines 1,8 and 2,0
   Repair of a head of cylinders
   Engine support
   Removal and engine and transmission installation
   Block of cylinders
   Cranked shaft
   Flywheel
   Piston
   Air filter (ACL)
   Final collector
   Inlet collector
   System of production of the fulfilled gases
   Search and elimination of malfunctions
+ Diesel engine of 2,0 l
+ greasing System
+ cooling System
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
+ Steering
+ Brake system
+ Body
+ air Central air
+ Electric equipment
Electric circuits



System of production of the fulfilled gases

Removal

Main exhaust silencer

Before removal or survey of elements of system of production of the fulfilled gases be convinced that it cooled down enough.


 PERFORMANCE ORDER

  1. Disconnect the exhaust silencer from the central pipe.
  1. Remove rubber suspension brackets and the main exhaust silencer from the car.

Central exhaust silencer

 PERFORMANCE ORDER

  1. Separate the central exhaust silencer from a reception exhaust pipe and the main exhaust silencer.
  1. Remove rubber suspension brackets and the central exhaust silencer from the car.

Reception exhaust pipe

 PERFORMANCE ORDER

  1. Separate a reception exhaust pipe from catalytic converter or a final collector.
  2. Turn out forward tightening a bolt of an exhaust pipe and a nut of fastening of the central exhaust silencer.

Check

 PERFORMANCE ORDER

  1. Check exhaust silencers and pipes on absence of corrosion and damages.
  1. Check rubber suspension brackets on absence of aging and cracks.

Installation

 PERFORMANCE ORDER

  1. Temporarily establish assembly of a reception exhaust pipe, the central and back exhaust silencers.
  2. Reliably tighten all connections of elements of system of production of the fulfilled gases. Moving to the parties an exhaust system of the car, check, that it did not concern a car body. Otherwise replace rubber suspension brackets of an exhaust system.