Hyundai Elantra

since 2000-2004 of release

Repair and car operation



Elantr's Hyundai
- Petrol engines 1,6, 1,8 and 2,0 of l
   Compression check
   Gear belt
   Adjustment of a tension of a gear belt
   Adjustment of a tension of a poliklinovy belt
   Adjustment of a tension of a belt of a drive of the generator
   Camshafts
   Check and adjustment of gaps of valves on engines 1,8 and 2,0 of l (MLA)
   Hydraulic jacks of gaps of valves of the engine of 1,6 l
   Installation of a cover of a head of cylinders
   Directing to a chain
   Chain
   Installation of camshafts
   The mechanism of change of the moment of opening and closing of valves (CVVT) on l engines 1,8 and 2,0
   Repair of a head of cylinders
   Engine support
   Removal and engine and transmission installation
   Block of cylinders
   Cranked shaft
   Flywheel
   Piston
   Air filter (ACL)
   Final collector
   Inlet collector
   System of production of the fulfilled gases
   Search and elimination of malfunctions
+ Diesel engine of 2,0 l
+ greasing System
+ cooling System
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
+ Steering
+ Brake system
+ Body
+ air Central air
+ Electric equipment
Electric circuits



Flywheel

Removal

 PERFORMANCE ORDER

  1. Remove a transmission and coupling.
  2. Turn out bolts and remove a flywheel. If on the car the automatic transmission is established, remove a drive plate. At a reversing of bolts block a flywheel from a provorachivaniye.

Check

 PERFORMANCE ORDER

  1. Check a condition of a surface of the flywheel contacting to a disk of coupling. In the presence of considerable wear replace a flywheel.
  2. Check palpation of a surface of the flywheel contacting to a disk of coupling. Palpation: 0,1 mm3.
  3. Check a condition of a gear wreath of a flywheel on absence of damages and wear and if necessary replace it.

Installation

Establish a flywheel or a drive plate on a cranked shaft. The special tool block a flywheel from a provorachivaniye and tighten bolts of fastening of a flywheel.

Inhaling moment: 120–130 N • m.