Hyundai Elantra

since 2000-2004 of release

Repair and car operation



Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
+ greasing System
+ cooling System
- Fuel system
   + Fuel system of petrol engines
   - Fuel system of diesel engines
      Specifications
      General information about system of injection of "Common Rail"
      Characteristics of system of injection
      Control injection of fuel
      Main injection of fuel
      Additional injection of fuel
      Reduction of toxicity of the fulfilled gases
      Fuel system Common Rail
      EDC control system
      ECU
      Management of the maximum quantity of air arriving in the engine
      The active shock-absorber reducing fluctuations of frequency of rotation of a cranked shaft of the engine
      Engine switching off
      Glow plugs
      Removal and nozzle installation
      Installation of the fuel pump of a high pressure
      Measuring instrument of a consumption of air (Air flow sensor – AFS)
      The sensor of temperature of cooling liquid (ECT)
      Sensor of provision of a camshaft (CMP)
      Sensor of an angle of rotation of a cranked shaft
      Nozzles
      The sensor of pressure of fuel in the accumulator of a high pressure (RPS)
      Sensor of temperature of fuel (FTS)
      Valve of adjustment of pressure
      Search and elimination of malfunctions
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
+ Steering
+ Brake system
+ Body
+ air Central air
+ Electric equipment
Electric circuits



The sensor of pressure of fuel in the accumulator of a high pressure (RPS)

The sensor measures instant pressure of fuel in the accumulator of a high pressure and transmits ESM signal.

Fuel under pressure through an opening influences a sensor diaphragm on which the sensor element (the semi-conductor device) is established. transforming pressure in an electric signal. Through contacts of the socket both an electric chain the generated and strengthened signal is transferred to ECU.

Sensor replacement

 PERFORMANCE ORDER

  1. If target tension of the RPS sensor does not correspond demanded, replace the sensor.
  2. Replace the sensor taking into account the following requirements.
    1. if the sensor is established repeatedly, replace the sealing washer made of soft metal;
    2. at removal of consolidation do not damage a condensed surface;
    3. at installation of the sensor put on a sealing washer a little lubricant;
    4. inhaling moment: 35±2 N • m.