Hyundai Elantra

since 2000-2004 of release

Repair and car operation

Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
+ greasing System
+ cooling System
- Fuel system
   + Fuel system of petrol engines
   - Fuel system of diesel engines
      General information about system of injection of "Common Rail"
      Characteristics of system of injection
      Control injection of fuel
      Main injection of fuel
      Additional injection of fuel
      Reduction of toxicity of the fulfilled gases
      Fuel system Common Rail
      EDC control system
      Management of the maximum quantity of air arriving in the engine
      The active shock-absorber reducing fluctuations of frequency of rotation of a cranked shaft of the engine
      Engine switching off
      Glow plugs
      Removal and nozzle installation
      Installation of the fuel pump of a high pressure
      Measuring instrument of a consumption of air (Air flow sensor – AFS)
      The sensor of temperature of cooling liquid (ECT)
      Sensor of provision of a camshaft (CMP)
      Sensor of an angle of rotation of a cranked shaft
      The sensor of pressure of fuel in the accumulator of a high pressure (RPS)
      Sensor of temperature of fuel (FTS)
      Valve of adjustment of pressure
      Search and elimination of malfunctions
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
+ Steering
+ Brake system
+ Body
+ air Central air
+ Electric equipment
Electric circuits

Installation of the fuel pump of a high pressure

  • The fuel system works at high pressures (the 1350th bar).
  • Do not carry out any works on fuel system at the working engine or within 30 seconds after its stop.
  • Always observe precautionary measures.
  • At work provide absolute purity.


    Insert the coupling into the pump. Apply a thin film lubricant on a sealing ring and establish the fuel pump on a head of cylinders, at the same time turning the pump for gearing of a shaft of the pump with a camshaft. Put on a carving of bolts of fastening of the fuel pump the blocking structure excluding their spontaneous otvorachivaniye. Screw bolts with washers and tighten them the demanded moment. Inhaling moment: 13–18 N • m.
    Establish the pipeline of a high pressure. Inhaling moment: 18–23 N • m.