Hyundai Elantra

since 2000-2004 of release

Repair and car operation



Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
+ greasing System
+ cooling System
- Fuel system
   + Fuel system of petrol engines
   - Fuel system of diesel engines
      Specifications
      General information about system of injection of "Common Rail"
      Characteristics of system of injection
      Control injection of fuel
      Main injection of fuel
      Additional injection of fuel
      Reduction of toxicity of the fulfilled gases
      Fuel system Common Rail
      EDC control system
      ECU
      Management of the maximum quantity of air arriving in the engine
      The active shock-absorber reducing fluctuations of frequency of rotation of a cranked shaft of the engine
      Engine switching off
      Glow plugs
      Removal and nozzle installation
      Installation of the fuel pump of a high pressure
      Measuring instrument of a consumption of air (Air flow sensor – AFS)
      The sensor of temperature of cooling liquid (ECT)
      Sensor of provision of a camshaft (CMP)
      Sensor of an angle of rotation of a cranked shaft
      Nozzles
      The sensor of pressure of fuel in the accumulator of a high pressure (RPS)
      Sensor of temperature of fuel (FTS)
      Valve of adjustment of pressure
      Search and elimination of malfunctions
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
+ Steering
+ Brake system
+ Body
+ air Central air
+ Electric equipment
Electric circuits



Sensor of provision of a camshaft (CMP)

The sensor of provision of a camshaft develops impulses in VMT of the piston of the 1st and 4th cylinders in a compression step on the basis of which the ESM block defines sequence of injection of fuel.

The sensor of frequency of rotation of a cranked shaft hands over to the ESM block information on an angle of rotation of a cranked shaft (position of the piston). On the basis of information of a target signal of this sensor the ESM block calculates frequency of rotation of the engine and the provision of a cranked shaft.