Hyundai Elantra

since 2000-2004 of release

Repair and car operation



Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
+ greasing System
- Cooling system
   Specifications
   Check of tightness of system of cooling
   Check of a cover of a radiator under pressure
   Check of density of cooling liquid
   Tubes and hoses of system of cooling
   Water pump
   Radiator
   Radiator cover
   Thermostat
   The sensor of temperature of cooling liquid
   The engine of the fan of a radiator of cars with diesel engines of 2,0 l
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
+ Steering
+ Brake system
+ Body
+ air Central air
+ Electric equipment
Electric circuits



Thermostat


Removal

 PERFORMANCE ORDER

  1. Merge cooling liquid to the level located below the thermostat.
  2. Remove the union of an input of cooling liquid and laying.
  3. Remove the thermostat.
  1. On a thread suspend the thermostat in a transparent vessel with water. Insert into water the thermometer, heat up a vessel with water and watch the thermostat valve. Define temperature of the beginning of opening and complete opening of the valve of the thermostat.

Petrol engines

Temperature of the beginning of opening of the valve of the thermostat: 82°С.
Temperature of complete opening of the valve of the thermostat: 95 °C.

Diesel engines

Temperature of the beginning of opening of the valve of the thermostat: 83,5-86,5°C.
Temperature of complete opening of the valve of the thermostat: 100 °C.

Installation

 PERFORMANCE ORDER

  1. Establish the thermostat so that the valve for air removal correctly settled down in a nest. If the thermostat is established in the wrong situation, its working capacity can be broken.
  1. Establish new laying and the union of an input of cooling liquid.
    Inhaling moment: 20–25 N • m.
  2. Fill in in cooling system necessary amount of demanded cooling liquid. Start up the engine and check absence of leaks from cooling system.

The moment of an inhaling of the sensor of temperature of cooling liquid: 20–40 N • m.