Hyundai Elantra

since 2000-2004 of release

Repair and car operation



Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
+ greasing System
- Cooling system
   Specifications
   Check of tightness of system of cooling
   Check of a cover of a radiator under pressure
   Check of density of cooling liquid
   Tubes and hoses of system of cooling
   Water pump
   Radiator
   Radiator cover
   Thermostat
   The sensor of temperature of cooling liquid
   The engine of the fan of a radiator of cars with diesel engines of 2,0 l
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
+ Steering
+ Brake system
+ Body
+ air Central air
+ Electric equipment
Electric circuits



Water pump

Water pump of engines of 2,0/1,8 l

Removal

 PERFORMANCE ORDER

  1. Disconnect a wire from the negative plug of the storage battery. Merge cooling liquid in the suitable container and disconnect a hose from the union of an input of cooling liquid of the water pump.
  2. Remove poliklinovy a belt and a pulley of the water pump.
  3. Remove casings of a gear belt and a roller of a tension of a gear belt.
  4. Turn out bolts of fastening of the water pump, then remove a generator support.
  5. Remove the water pump from the block of cylinders.

Check

 PERFORMANCE ORDER

  1. Check each detail on lack of cracks, damages or wear and if necessary replace the pump assembled.
  1. Turn a shaft of the water pump and check smoothness of rotation in the absence of noise.
  2. Check absence of leakages of cooling liquid from the pump. If there is a leak from an opening With, pump consolidation is faulty. If necessary, replace the water pump.

Installation

 PERFORMANCE ORDER

  1. Clear of the remains of laying and an alien material a surface of consolidation of the water pump.
  1. Establish on the water pump new laying, establish the pump and fix it bolts. Inhaling moment: 20–27 N • m.
  1. Establish a roller of a tension of a gear belt and adjust a belt tension.
  2. Establish casings of a gear belt.
  3. Establish a pulley of the water pump and poliklinovy a belt, then adjust a belt tension.
  4. Fill in in cooling system necessary amount of demanded cooling liquid.
  5. Connect a wire to the negative plug of the storage battery. Start up the engine and check absence of leaks from cooling system.

Water pump of engines of 1,6 l

Removal

 PERFORMANCE ORDER

  1. Disconnect a wire from the negative plug of the storage battery. Merge cooling liquid in the suitable container and disconnect a hose from the union of an input of cooling liquid of the water pump.
  2. Remove poliklinovy a belt and a pulley of the water pump.
  3. Remove casings of a gear belt and a roller of a tension of a gear belt.
  4. Turn out bolts of fastening of the water pump, then remove a generator support.
  5. Remove the water pump from the block of cylinders.

Check

 PERFORMANCE ORDER

  1. Check each detail on lack of cracks, damages or wear and if necessary replace the pump assembled.
  2. Turn a shaft of the water pump and check smoothness of rotation in the absence of noise.
  1. Check absence of leakages of cooling liquid from the pump. If there is a leak from an opening With, pump consolidation is faulty. If necessary, replace the water pump.

Installation

 PERFORMANCE ORDER

  1. Clear of the remains of laying and an alien material a surface of consolidation of the water pump.
  1. Establish on the water pump new laying, establish the pump and fix it bolts. Inhaling moment: А: 12–15 N • m In: 20–27 N • m.
  1. Establish a roller of a tension of a gear belt and adjust a belt tension.
  2. Establish casings of a gear belt.
  3. Establish a pulley of the water pump and poliklinovy a belt, then adjust a belt tension.
  4. Fill in in cooling system necessary amount of demanded cooling liquid.
  5. Connect a wire to the negative plug of the storage battery. Start up the engine and check absence of leaks from cooling system.

Water pump of diesel engines of 2,0 l

Removal

 PERFORMANCE ORDER

  1. Disconnect a wire from the negative plug of the storage battery. Merge cooling liquid in the suitable container and disconnect a hose from the union of an input of cooling liquid of the water pump.
  2. Remove poliklinovy a belt and an arm of a support of the engine.
  3. Remove a casing of a gear belt and the mechanism of a tension of a gear belt.
  4. Turn out bolts of fastening of the water pump.
  5. Remove the water pump from the block of cylinders.

Check

 PERFORMANCE ORDER

  1. Check each detail on lack of cracks, damages or wear and if necessary replace the pump assembled.
  2. Turn a shaft of the water pump and check smoothness of rotation in the absence of noise.
  3. Check absence of leakages of cooling liquid from the pump. If there is a leak, pump consolidation is faulty. If necessary, replace the water pump.

Installation

 PERFORMANCE ORDER

  1. Clear of the remains of laying and an alien material a surface of consolidation of the water pump.
  2. Establish a new sealing ring of round section in a flute at a forward end face of a tube of system of cooling and moisten a ring with cooling liquid. Do not use engine oil or lubricant.
  1. Establish on the water pump new laying, establish the pump and fix it bolts. Inhaling moment: 10 mm: 10–12 N • m of 14 mm: 48–52 N • m.
  1. Establish the mechanism of a tension of a gear belt and a gear belt. Adjust a tension of a gear belt, then establish casings of a gear belt.
  2. Fill in in cooling system necessary amount of demanded cooling liquid.
  3. Connect a wire to the negative plug of the storage battery. Start up the engine and check absence of leaks from cooling system.