Hyundai Elantra

since 2000-2004 of release

Repair and car operation



Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
+ greasing System
- Cooling system
   Specifications
   Check of tightness of system of cooling
   Check of a cover of a radiator under pressure
   Check of density of cooling liquid
   Tubes and hoses of system of cooling
   Water pump
   Radiator
   Radiator cover
   Thermostat
   The sensor of temperature of cooling liquid
   The engine of the fan of a radiator of cars with diesel engines of 2,0 l
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
+ Steering
+ Brake system
+ Body
+ air Central air
+ Electric equipment
Electric circuits



The engine of the fan of a radiator of cars with diesel engines of 2,0 l

Removal

 PERFORMANCE ORDER

  1. Disconnect a wire from the negative plug of the storage battery.
  2. Disconnect the socket from the engine of the fan of a radiator and a plait of wires from a casing.
  3. On cars with an automatic transmission disconnect hoses from an oil radiator.
  4. Turn out four bolts of fastening of a casing of the fan.
  5. Remove a casing together with the engine of the fan of a radiator.
  6. Remove a clip and separate the fan from the fan engine.
  1. Turn out three screws and remove the fan engine.

Check of the engine of the fan of a radiator

 PERFORMANCE ORDER

  1. Check that the engine of the fan of a radiator rotates when giving tension on it from the storage battery.
  1. Check that at operation of the engine there are no extraneous noise.

Check of the relay of the engine of the fan of a radiator

 PERFORMANCE ORDER

  1. From the block of safety locks and the relay in a motor compartment remove the relay of the engine of the fan of a radiator.
  1. Ohmmeter check conductivity between contacts «2» and «4».
Point
Numbers of contacts
Conductivity
1–3
ON
1–3
No
OFF
2–4
Is

Installation

Installation is carried out to sequences, return to removal.

Be convinced that the radiator fan after installation does not contact with a casing.