Hyundai Elantra

since 2000-2004 of release

Repair and car operation



Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
+ greasing System
- Cooling system
   Specifications
   Check of tightness of system of cooling
   Check of a cover of a radiator under pressure
   Check of density of cooling liquid
   Tubes and hoses of system of cooling
   Water pump
   Radiator
   Radiator cover
   Thermostat
   The sensor of temperature of cooling liquid
   The engine of the fan of a radiator of cars with diesel engines of 2,0 l
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
+ Steering
+ Brake system
+ Body
+ air Central air
+ Electric equipment
Electric circuits



Check of tightness of system of cooling

 PERFORMANCE ORDER

  1. Uncover a radiator.
  2. Be convinced that level of cooling liquid reaches a bulk mouth.
  3. To establish the device for check of a cover of a radiator to a bulk mouth and create pressure in cooling system. Be convinced that pressure in system of cooling remains within 2 minutes.

Pressure at check of tightness of system of cooling:

Petrol engines: 140 kPas
Diesel engines: 150 kPas
  1. Do not uncover a radiator on the hot engine as leaving pairs can lead to strong burns. Close a radiator cover thick rags and slowly unscrew a cover before emergence of hissing of leaving steam. After the steam-out termination slowly turn on, and uncover a radiator.
  2. Be convinced that in the checked places there is no moisture.
  3. When the device for check is removed, be careful not to spill cooling liquid from the device.
  4. Be careful at installation and moving of the device and at check do not injure a bulk mouth of a radiator.
  1. Otherwise define a place of leak and eliminate it.