Hyundai Elantra

since 2000-2004 of release

Repair and car operation



Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
+ greasing System
- Cooling system
   Specifications
   Check of tightness of system of cooling
   Check of a cover of a radiator under pressure
   Check of density of cooling liquid
   Tubes and hoses of system of cooling
   Water pump
   Radiator
   Radiator cover
   Thermostat
   The sensor of temperature of cooling liquid
   The engine of the fan of a radiator of cars with diesel engines of 2,0 l
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
+ Steering
+ Brake system
+ Body
+ air Central air
+ Electric equipment
Electric circuits



Radiator

Radiator of cars with petrol engines

Removal

 PERFORMANCE ORDER

  1. Disconnect a wire from the negative plug of the storage battery and I will corrode from the engine of the fan of a radiator.
  2. Establish the handle of adjustment of temperature in car salon on the maximum temperature.
  3. Turn out a stopper plum on a radiator and merge cooling liquid in the suitable container.
  4. Weaken collars and disconnect the top and bottom hoses from a radiator.
  5. On cars with an automatic transmission disconnect hoses from an oil radiator.

For an exception of an effluence of transmission liquid and dirt hit in system, close the ends of hoses of an oil radiator suitable caps.

  1. Turn out bolts of fastening of a radiator.
  2. Remove a radiator together with the radiator fan.
  3. Remove the fan engine from a radiator.

Check

 PERFORMANCE ORDER

  1. Check on lack of pognuty plates of a radiator. If necessary, using a hairbrush, straighten platinum.
  2. Check a radiator on lack of cracks, damages and absence of leaks.
  3. Check radiator hoses on lack of cracks, damages and attritions.
  4. Check a broad tank on absence of damages.
  5. Check a radiator cover.
  6. Check pressure of opening of the valve of a cover of a radiator.
  7. Check laying of a cover of a radiator on lack of cracks and damages.

Check of the engine of the fan of a radiator

 PERFORMANCE ORDER

  1. Check that the engine of the fan of a radiator rotates when giving tension on it from the storage battery.
  1. Check that at operation of the engine there are no extraneous noise.

Installation

 PERFORMANCE ORDER

  1. Installation is carried out to sequences, return to removal. Fill in in cooling system necessary amount of demanded cooling liquid.
  2. Start up the engine and leave it to work until the thermostat valve will open, then stop the engine.
  3. Uncover a radiator and to add cooling liquid to the upper edge of a mouth of a radiator.
  4. Check absence of leaks from cooling system.

Radiator of cars with diesel engines of 2,0 l

Removal

 PERFORMANCE ORDER

  1. Disconnect a wire from the negative plug of the storage battery.
  2. Disconnect the socket from the engine of the fan of a radiator.
  3. Turn out a stopper plum on a radiator and merge cooling liquid in the suitable container.
  4. Weaken collars and disconnect the top and bottom hoses from a radiator.
  1. On cars with an automatic transmission disconnect hoses from an oil radiator.

For an exception of an effluence of transmission liquid and dirt hit in system, close the ends of hoses of an oil radiator suitable caps.

  1. Turn out the top bolt of fastening of a radiator.
  1. Remove a radiator together with the radiator fan.
  2. Remove from a radiator the engine of the fan and the condenser.

Check

 PERFORMANCE ORDER

  1. Check on lack of pognuty plates of a radiator. If necessary, using a hairbrush, straighten platinum.
  2. Check a radiator on lack of cracks, damages and absence of leaks.
  3. Check radiator hoses on lack of cracks, damages and attritions.
  4. Check a broad tank on absence of damages.
  5. Check a radiator cover.
  6. Check hoses of an oil radiator lack of cracks, damages and attritions.

Installation

 PERFORMANCE ORDER

  1. Installation is carried out to sequences, return to removal. Fill in in cooling system necessary amount of demanded cooling liquid.
  2. Start up the engine and leave it to work until the thermostat valve will open, then stop the engine.
  3. Uncover a radiator and to add cooling liquid to the upper edge of a mouth of a radiator.
  4. Check absence of leaks from cooling system.