Hyundai Elantra

since 2000-2004 of release

Repair and car operation


Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
+ greasing System
+ cooling System
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
- Coupling
   Specifications
   Adjustment of a pedal of coupling
   Pumping of hydraulic system of a drive of coupling
   Conducted and press coupling disks
   Main cylinder of coupling
   Coupling pedal
   Working cylinder of coupling
   Search and elimination of malfunctions
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
+ Steering
+ Brake system
+ Body
+ air Central air
+ Electric equipment
Electric circuits


Pumping of hydraulic system of a drive of coupling

Any hydraulic system works normally if air is removed from it.

The liquid used in a hydraulic drive, dissolves paint and plastic therefore at liquid hit on a paint and varnish covering of the car wash out it a large amount of water.

During removal of air add only pure liquid recommended by the manufacturer.

Recommended liquid: SAE J1703 (DOT3).

 PERFORMANCE ORDER

    On the cylinder of switching off of coupling weaken the union of pumping and attach to it a hose. Arrange other end of a hose in glass capacity of sufficient volume. Slowly press a coupling pedal. At the pressed pedal of coupling weaken the union of pumping and let the air out from hydraulic system. Tighten the union of pumping and release a coupling pedal. Repeat operations until there will be a brake liquid without air vials.

The fast repeated pressing of a pedal of coupling in the field of B–C can lead to a pusher exit from the case of the cylinder of coupling during pumping. To press a pedal of coupling it is necessary only after its return to the top situation (And).