Hyundai Elantra

since 2000-2004 of release

Repair and car operation



Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
+ greasing System
+ cooling System
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
- Coupling
   Specifications
   Adjustment of a pedal of coupling
   Pumping of hydraulic system of a drive of coupling
   Conducted and press coupling disks
   Main cylinder of coupling
   Coupling pedal
   Working cylinder of coupling
   Search and elimination of malfunctions
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
+ Steering
+ Brake system
+ Body
+ air Central air
+ Electric equipment
Electric circuits



Adjustment of a pedal of coupling

 PERFORMANCE ORDER

  1. Measure distance from a forward surface of a pedal to a carpet. Height of installation of a pedal of coupling (A): 166,9 mm.
  1. If the height of installation of a pedal of coupling does not correspond to demanded value, adjust it as follows:
    1. weaken a lock-nut and, rotating a bolt, adjust a free wheeling of a pedal of coupling, then tighten a lock-nut;

After adjustment tighten a bolt while it will not reach a pedal emphasis, then tighten a lock-nut.

b. rotate a pusher before achievement of the demanded height of installation of a pedal, then tighten a lock-nut.

At adjustment of height of installation or a free wheeling of a pedal of coupling be careful not to move a pusher to the main cylinder of coupling.

  1. Hand press a coupling pedal before emergence of notable resistance and measure size of a free wheeling.
    Free wheeling of a pedal of coupling (In): 6–13 mm.