Hyundai Elantra

since 2000-2004 of release

Repair and car operation



Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
+ greasing System
+ cooling System
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
+ Steering
+ Brake system
- Body
   Specifications
   Adjustment of hinges of a cowl
   Trunk lid
   Door of a luggage compartment
   Forward door
   Back door
   Moldings
   Roof hatch
   Console
   Dashboard
   Ceiling furnish
   Internal upholstery of salon
   Front bumper
   Rear bumper
   Sitting lobbies
   Back seat
   Seat belts
   Humeral seat belt of back sitting
   Zone seat belt of back sitting
   Search and elimination of malfunctions
+ air Central air
+ Electric equipment
Electric circuits



Dashboard

Removal and installation

 PERFORMANCE ORDER

  1. Disconnect a wire from the negative plug of the storage battery.
  1. Disconnect sockets from forward seats, then remove sitting lobbies.

At removal of forward seats do not damage an upholstery of salon of the car.

  1. After removal of the handle from the gear shifting lever, an edge of a flat screw-driver remove the top cover of the console.
  1. Turn out screws and remove the floor console.
  1. Remove lateral covers from the floor console.
  1. Remove a safety cushion of the driver.

For removal of a safety cushion look the corresponding description.

  1. Remove a steering wheel.
  1. Turn out screws of fastening of the bottom casing of a steering column and remove it.
  1. Remove a spiral spring of a safety cushion of the driver.
  1. Disconnect the socket and remove the multipurpose switch.
  1. Turn out screws of fastening of a combination of devices.
  1. Remove an ashtray, then turn out screws of fastening of a combination of devices and remove it.
  1. Disconnect sockets from a combination of devices.
  1. Remove a combination of devices.
  1. Remove a radio receiver and the control panel the conditioner.
  1. Turn out screws of fastening of the bottom decorative panel located under the dashboard.
  1. Turn out screws of fastening of the lateral decorative panel and remove it from the dashboard.
  1. Remove an arm of support of the dashboard from the driver.
  1. Turn out bolts of fastening of a steering column and remove it.
  1. Remove an upholstery from a forward door and the bottom furnish of a forward rack.
  1. Disconnect sockets from the dashboard.
  1. Remove a lattice of a heater and turn out bolts of fastening of the dashboard.
  1. Remove lateral covers from the lower part of the dashboard and turn out bolts of fastening of the dashboard.
  1. Turn out bolts of fastening of the dashboard to the central arm and a ware box.
  1. Turn out other bolts of fastening of the dashboard.
  1. Remove the dashboard.
  1. Installation is carried out to sequences, return to removal, taking into account reliable connection of all sockets.