Hyundai Elantra

since 2000-2004 of release

Repair and car operation



Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
+ greasing System
+ cooling System
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
- Ignition system
   Specifications
   Removal and installation of coils of ignition
   Check of the coil of ignition
   Ignition check
   Check of spark plugs
   Analysis of spark plugs
   Check of functioning of spark plugs
   High-voltage wires
   Ignition lock
   Search and elimination of malfunctions
+ System of preliminary heating of the diesel engine
+ Coupling
+ Mechanical transmission
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
+ Steering
+ Brake system
+ Body
+ air Central air
+ Electric equipment
Electric circuits



High-voltage wires

Arrangement of wires

The wrong installation and arrangement of high-voltage wires can lead to a spark proskakivaniye from a wire on a wire or on "weight" that, in turn, can lead to admissions of ignition and reduction of frequency of rotation of a cranked shaft at car movement at great speed.

Therefore establish high-voltage wires properly, as is shown in drawings.


Check

 PERFORMANCE ORDER

  1. Disconnect high-voltage wires from candles and ignition coils. Clear and check integrity of isolation of high-voltage wires. Check internal surfaces of contacts of high-voltage wires on absence of corrosion or a deposit.
  2. By ohmmeter measure resistance of high-voltage wires.
High-voltage wires
Cylinder
No. 1
No. 2
No. 3
No. 4
Length, mm
560
440
360
310
Resistance (BOUGI), Ohm
2,51–3,76
1,97–2,96
1,61–2,42
1,39–2,08
Resistance (R16AIPS), Ohm
5,60–11,76
4,40–9,24
3,60–7,56
3,10–6,51

Resistance of a high-voltage wire should not exceed 10 000 Ohm, otherwise replace a wire.