Hyundai Elantra

since 2000-2004 of release

Repair and car operation



Elantr's Hyundai
+ Petrol engines 1,6, 1,8 and 2,0 of l
+ Diesel engine of 2,0 l
+ greasing System
+ cooling System
+ Fuel system
+ Monitoring systems and decrease in toxicity of the fulfilled gases
+ ignition System
+ System of preliminary heating of the diesel engine
+ Coupling
- Mechanical transmission
   Specifications
   Check of level of oil
   Replacement of transmission oil
   Replacement of an oil sealing ring of a power shaft
   Removal and transmission installation
   Gear shifting mechanism
   Search and elimination of malfunctions
+ Automatic transmission
+ Power shafts, forward and back axes
+ Suspension bracket
+ Steering
+ Brake system
+ Body
+ air Central air
+ Electric equipment
Electric circuits



Removal and transmission installation


Removal


 PERFORMANCE ORDER

    Disconnect, first of all, a wire from the negative plug of the storage battery, then – from positive.
    Remove the storage battery and a battery support.
    Remove the air filter.
      Uncover the air filter.

b. Remove the case of the air filter.

    Disconnect the socket of the switch of light of a backing.
    Remove an arm and disconnect sockets from the sensor of an angle of rotation of a cranked shaft (CKP), the sensor of oxygen and the sensor of pressure of oil.
    Remove a cable of a drive of a speedometer.
    Turn out a bolt of fastening of the working cylinder of coupling.
    Remove шплинт fastenings of a cable of gear shifting.
    Remove шплинт fastenings of a cable of a choice of transfers.
    Remove a clip of fastening of a cable of gear shifting.
    Remove a clip of fastening of a cable of a choice of transfers.
    Disconnect the kardanny hinge from a shaft of a steering column.
    Disconnect a hose of the oil pump of the amplifier of a steering.

Be careful, as at a detachment of a hose liquid will follow.

    Remove a clip and disconnect a returnable hose of the pump of the amplifier of a steering.
    Turn out the top bolts of fastening of a transmission.
    Turn out bolts and remove a starter.
    The special adaptation 09200-38001 support the engine so that the weight of the engine was perceived by the adaptation.
    Remove forward wheels and supports of forward brakes.
    Disconnect from a rotary fist the spherical hinge of a tip of steering draft.
    Remove the sensor of speed and turn out bolts of fastening of a forward rack to a rotary fist.
    Turn out a drain stopper and merge oil from a transmission.
    Remove a transmission arm.
      a. Turn out a bolt of fastening of a support.

b. Turn out (top) bolt from a body.

c. Turn out (lateral) bolt from a body.

d. Turn out a lateral assembly bolt of fastening of a transmission.

    Remove a forward roller stopper.
      Turn out a bolt of fastening of a support.

b. Turn out (lateral) bolt of fastening of a stopper.

c. Turn out (bottom) bolt of fastening of a stopper.

    Remove a back roller stopper.
      Turn out a bolt of fastening of a support.

b. Turn out a bolt of fastening of a stopper.

    Remove a power shaft.
    Remove the exhaust silencer.
    Turn out bolts of fastening of the bottom frame.
    Support a transmission a jack.
    Turn out the bottom bolts of fastening of a transmission.
    Remove a transmission.

At removal of a transmission be convinced that the jack supports a transmission on the big area.

Installation

Installation is carried out to sequences, return to removal.